Interfacing
We carry a wide range of interfacing for your sewing needs. We carry Palmer/Pletsch pre-packaged interfacing, select Pellon products and garment-industry quality interfacing direct from NYC design rooms.
Looking for professional results? Use the Palmer/Pletsch pre-packaged interfacing, available in 1 yard pieces. It is 60" wide, giving you wider width to work with. This is the interfacing the garment industry uses. Various weights available, see descriptions below.
If you want more professional looking finishes, use the SewkeysE seam tapes. Various types available below. These tapes are used in all of Pamela's Patterns.
-
Black 100% Polyester Tricot Fusible Interfacing 58W
SKU: MMB6252 -
-
-
Pale Eggshell White 100% Polyester Fusible Weft Interfacing 59W
SKU: MOD5996rFusible Weft Interfacing
Suitable for medium weight woven fabrics such as suiting. Attain a soft look on wool jackets and suits.
59" wide - Garment Industry Width
Machine Wash
-
Paper White 100% Polyester Mediumweight Fusible Woven Interfacing 58W
SKU: MND5995rMediumweight Fusible Woven Interfacing
Suitable for medium woven fabrics such as shirting, poplin, twill, etc. Can also use on the bias.
58" wide - Garment Industry Width
Macine Wash
-
SewkeysE - White Fusible Knit Stay Tape/Interfacing - 1 1/4" 25 Yard Roll
SKU: SU9507Only 3 left in stockExtremely Fine White 1 1/4" Wide Knit Stay Tape/Interfacing - 25 yard roll
This tape will form easily around curves. Fuse it to the wrong side of the neckline edge to keep it stable and prevent "gaposis". When you stitch the neck binding on, it gives you not only stability, but an edge to follor for the perfect seam allowance!
Can also be used to stabilize Minky Fleece when using it for quilting. When fused to the backside, along the seamline, it will prevent it from stretching making your quilting project easier to sew.
Uses: Hems, Necklines, Side Seams & Sleeves, Seams in Laces, Cardigan Fronts and zipper areas.
These are the tapes that are suggested to use in all of Pamela's Patterns.
-
SewkeysE - Clear Double Sided Fusible Stay Tape - 1" 25 Yard Roll
SKU: SU9508Extremely Fine Clear 1" Wide Double Sided Fusible Stay Tape
You will receive a 25 Yard Roll
Get a professional finish with this fusible stay tape. Keep hems smooth and even by fusing this tape to the wrong side of the hems. If the seam is curved, clip the tape to help form around the curves. When the tape has cooled from the iron, peel the release paper off and press up the hem. It gives you a perfect 1" hem without measuring. For a narrower hem, just trim the tape to the desired width. Finish off by stitching with a slight zigzag stitch (width of 1.0) and steam or block back in shape. Beautiful ripple free hems!
Meant For Hems, Zippers, Kick Pleats, Neckline, Tiny Pleats, Apply Trims
These are the tapes that are suggested to use in all of Pamela's Patterns.
-
Palmer/Pletsch - PerfectFuse Tailor Ultra - 1 Yd White Poly/Rayon Fusible Weft Interfacing 66W
SKU: SU9504This weft interfacing has the hand of cashmere with a little gentle give in the crosswise direction making it very pliable and soft. As tailored jacket fabrics have become softer, lighter in weight, and drapier, this NEW PREMIUM QUALITY interfacing with its softer hand makes tailoring these fabrics EASIER.
• The resin system is unique in the world. You’ll never see it on the right side of the fabric and it won’t be stiff or boardy, making it ideal even on very fine woolens.• It’s 66 inches wide, enough to fuse the full front on two jackets in most sizes• Crosswise stretch is compatible with stretch wovens.• Preshrink if you’re planning to wash the garment. If dry cleaning, preshrinking is not necessary.• Fuse for 14-16 seconds in each spot. -
Palmer/Pletsch - PerfectFuse Medium - 1 Yd White Rayon/Poly Fusible Weft Interfacing 60W
SKU: SU9503PerfectFuse Medium is great for dresses, blouses, and jackets where a little more body is needed.What you can’t see is what can make the biggest difference in the quality and appearance of garments. It is called interfacing and it is used inside a garment’s edges to make them crisp. Sometimes designers even use a soft luxury fabric for a jacket, then to give it more body, they interface the entire front so it doesn’t look droopy. These hidden ingredients have been manufacturers’ secrets for years.• Most often used on upper collar and facing of unlined jackets.• To add body to cotton or other fabrics for machine embroidery. Preshrink both fabric and interfacing.• Wider width allows fusing to large pieces without piecing.• Use on jackets where fabric is too heavy for TailorUltra.• Washable and dry cleanable. See instructions on back.• The high rayon content is for softness, so please preshrink. -
Palmer/Pletsch - PerfectFuse Sheer - 1 Yd White 100% Poly Fusible Weft Interfacing 60W
SKU: SU9502PerfectFuse Sheer is ideal for silky blouse-weight fabrics and cotton shirtings, as well as knits.What you can’t see is what can make the biggest difference in the quality and appearance of garments. It is called interfacing and it is used inside a garment’s edges to make them crisp. Sometimes designers even use a soft luxury fabric for a jacket, then to give it more body, they interface the entire front so it doesn’t look droopy. These hidden ingredients have been manufacturers’ secrets for years.• Perfect for lightweight fabrics—polyesters, silks, cotton, stretch wovens, and rayon.• Fusing agent won’t show through to the right side.• Polyester weft does not need preshrinking and will not shrink or bubble with washing. (Do preshrink your fabric before fusing.)• Texture is fine and smooth enough to use with whites and sheers, yet has a crisp feel, perfect for collars, cuffs, and front facings on blouses and shirts.• Perfect to stabilize bias neck facings and add body to zippers in fine fabric. -
Palmer/Pletsch - PerfectFuse Light - 1 Yd White 100% Poly Fusible Weft Interfacing 60W
SKU: SU9501Only 8 left in stockThis PerfectFuse interfacing is ideal for underlining and fusing to textured fabrics.What you can’t see is what can make the biggest difference in the quality and appearance of garments. It is called interfacing and it is used inside a garment’s edges to make them crisp. Sometimes designers even use a soft luxury fabric for a jacket, then to give it more body, they interface the entire front so it doesn’t look droopy. These hidden ingredients have been manufacturers’ secrets for years.• Great for fabrics that need extra body.• Crosswise stretch makes it compatible with stretch wovens and lightweight knits.• 60” width means you’ll rarely have to piece it to fit larger garment sections.• Adheres well to textured surfaces.• Adds soft body—great as underlining for woven fabrics.• Prevents stretch in buttonholes.• Washable and dry cleanable. Does not need to be preshrunk. -
-
-
Black Pellon Fusible Non-Woven Featherweight Interfacing 20W
SKU: SAF6766Pellon 100% Polyester Fusible interfacing Lightweight Color: Gray
-
White Pellon ShirTailor Interfacing 20W
SKU: SBB6765Pellon ShirTailor Interfacing Non-woven 20" Wide 100% Polyester Fusible interfacing Light to medium weight Color: White
-
White Pellon Fusible Non-Woven Midweight Interfacing 20W
SKU: SAF2212Pellon 100% Polyester Fusible interfacing Medium to Heavy weight Color: White
20" Wide
